How to print printer internal ip

Epson Receipt Printers (TM-T70, TM-T88, TM-M30 ethernet, TM-T20)

  1. Power the printer off.
  2. Press and hold the feed button.
  3. Power the printer on and continue to hold the feed button.
  4. After a few seconds, a settings sheet will print, including the IP address of the printer:

Epson Printers (U220B, TM-T20III,  TM-T20II)

  1. Ensure the printer is powered on.
  2. Press and hold the Reset button on the back of the device:
  3. After about 5 seconds, a settings paper will print, including the IP address of the printer:

Star Receipt Printers (TSP100 LAN, TSP-650, TSP-700)

  1. Power the printer off.
  2. Press and hold the feed button.
  3. Power the printer on and continue to hold the feed button.
  4. After a few seconds, a settings sheet will print, including the printer's IP address. The Star TSP-700 will print two sheets; in this case, the IP address is found on the second.

Zebra ZD410 Label Printer

  1. Ensure the printer is powered on.
  2. Press and hold the feed + cancel buttons at the same time for about 2 seconds:
  3. A settings sheet will print showing the IP address of the printer.

Note: The older Zebra LP2824 printers connect to an R212. The R212 provides the IP address, not the printer itself.

Zebra ZPL printer configuration

Turn off the printer, then press and hold the feed button and turn on the printer. You can check this video for more information: https://www.youtube.com/watch?v=Nx7ozMi9VL0